MOUNTING INSTRUCTIONS FOR PEDESTALS AND SWING ARM WALL MOUNTS.

FIG. 1. ATTACH LEVEL RITE (FOR WALL SWING ARM, SOLD SEPERATLY) OR PEDESTAL MOUNTING SYSTEM TO A SOLID SURFACE WORK BENCH. YOU CAN MOUNT ON TOP OF BENCH, OR DRILL A HOLE LARGE ENOUGH TO SLIDE THE VIRTICAL POST FROM THE UNDER SIDE OF WORK BENCH. ATTACH PLATE WITH 4 SCREWS (NOT INCLUDED). WHEN FINISHED YOU CAN TRANSFER FROM WORK BENCH TO A FINISHED PEDESTAL BASE REPEATING THE SAME STEPS.

FIG. 2. ATTACH MOUNTING PLATE TO BACKSIDE OF ANIMAL. MOUNT FLAT PLATE AGAINST BACK BOARD WITH TUBE OUTWARD, OR CUT A GROOVE SLIGHTLY WIDER THAN THE TUBE, RECESS THE TUBE SIDE INTO THE MANIKIN. USING 1 SCREW TO ATTACH TEMORARILY. LEVEL THE ANIMAL. ONCE LEVEL, TIGHTLY ATTACH MOUNTING PLATE WITH THE REMAINING SCREWS (1 1/4” pan head screws provided).

FIG. 3. AT THIS POINT IT IS UP TO YOUR CREATIVITY AS TO SCULPT THE BACKSIDE OF THE TROPHY, OR SIMPLY POSITION ON THE “SWING ARM WALL KIT”

FIG. 4 TO MOUNT THE “ANIMALS IN MOTION SWING ARM WALL KIT” YOU MUST USE A WALL STUD FINDER! CENTER THE LASER ART SCREW HOLES IN THE CENTER OF THE WALL STUD, LEVEL, AND ATTACH WITH 2 ½ INCH FLATHEAD WOOD SCREWS (PROVIDED). (WOOD SCREWS NOT INTENDED FOR MOUNTING TO STEEL WALL STUDS) NOW PLACE YOUR TROPHY ONTO SWING ARM, AND SWING YOUR TROPHY INTO A DIRECTION YOU WOULD LIKE TO VIEW HIM. EVEN SWING INTO CORNER! ENJOY!!!!!AND THANK YOU FOR CHOOSING ANIMALS IN MOTION SWING ARM, AND PEDESTAL MOUNTING SYSTEMS!!

(Disclosure) SAM RABY ENTERPRISES LLC ACCEPTS NO RESPONSIBILITY FOR IMPROPERLY ATTACHED “ANIMALS IN MOTION SWING ARMS”. REMEMBER YOU ARE SUPPORTING A LARGE AMOUNT OF LEVERAGED WEIGHT AWAY FROM YOUR WALL! ANIMALS IN MOTION SWING ARMS INTENDED FOR MOUNTED GAME HEADS ONLY. MAXIMUM WEIGHT 30 LB LIGHT DUTY (LD), 100 LB HEAVY DUTY (HD) APPLICATIONS.